A check valve , clack valve , non - return valve , reflux valve , retention valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. Check valves are two-port valves , meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. DXF, DWG and Visio formats available. No Symbol Symbol designation No Symbol Symbol designation 3. Reducing valve (adjustable) 3.
Double-seated changeover valve 3. A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically valves fittings , but are usually discussed as a separate category. Solenoid Valves - (9companies) Solenoid valves are devices that use a solenoid to control valve activation.
They are considered electromechanical control devices used to control liquid or gas flow. An electrical current runs through a coil to control the valve by moving a plunger. NON RETURN VALVE SYMBOL.
Used for high flow capacity. Non Return Valve Symbol. Normally Closed Ball Valve : Globe Valve : Excellent to be used as a control valve due to its complex flow path.
This valve is known for precise throttling and control. Symbol for two port valve with both ports closed. The spring pushes from the side that is drawn on and will return the valve back to its failsafe position. A non-return valve allows the flow of fluid in only one direction.
It is fitted to ensure that a medium flows through a pipe in the right direction, where pressure conditions may otherwise cause reversed flow. There are several types of non-return valves , such as swing type valve , spring-loade and clapper type valves. What is the purpose of a non return valve? Stencil: Hydraulic Miscellaneous. Logotype is the definitive modern collection of logotypes, monograms and other text-based corporate marks.
Featuring more than 3international typographic identities, by around 2design studios, this is an indispensable handbook for every design studio, providing a valuable resource to draw on in branding and corporate identity projects. Check, or non - return valves only allow flow in one direction. In the symbol shown on the left, the flow is allowed from the bottom pipe to the top pipe, but not back the other way.
Fitted upstream of the circuit to be protecte they provide total protection.
Using different colour codes for supply and exhaust versions, those valves avoid any mistakes in the installation process. Process Flow Diagram Symbols - Valves. Gate valve is a device used to control the flow of liquids and gases. Check valve , also known as one-way valve , is to prevent the line of medium back.
Globe valve refers to a mechanism used to control or stop the flow of liquid or gas through a pipe. The first valves on a boiler output line are usually stop-check valves, which are known here as non - return valves or boiler stop valves. They are vital when more than one boiler is connected to the main steam header, and they should be installed in the pipeline between each boiler and the header. Complete Symbols with Descriptions.
Two position, two way, normally open plunger operated valve with a spring return. Valve symbols A valve regulates, directs, or controls the flow of a fluid by opening, closing, or partially obstructing passageways in a piping system. This category includes rotameters, orifices, and other types of valves.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.