Molten puddle is straw colore watery, and leaves blowholes when it boils. Metal becomes bright red before it melts. Melting occurs quietly and rapidly, without sparking. Low-carbon and Melts quickly under the torch , becoming bright red before it melts.
Keep it in position on the valve of the cylinder while in use.
Where should the T-wrench be left after opening the acetylene valve. Clothing, combustible materials, hoses or other parts of the welding equipment. What should you keep the flame and hot metal away from. Never leave a lighted torch unattended.
Oxy -fuel Welding Safety. Always use the following sequence and technique for lighting a torch _____. Do not open the acetylene valve more than one and one.
Light the torch with a spark lighter and adjust the acetylene valve on the torch handle and the oxygen valve on the cutting torch until the flame has no yellow areas and the center is bright blue and well defined.
The inner flame is brought as bright blue with rounded cones. What kind of flame do you get when distinct parts of the flame are similar to that of the neutral flame , but the inner flame is pointed. If not stoppe the fire can travel through and damage the torch , hoses and explode the cylinder!
Check Out Top Brands On eBay. Looking For Great Deals? We Have Almost Everything On eBay. Free 2-day Shipping On Millions of Items. When attaching the welding nozzle to the torch handle you use.
Your hand (hand tighten only) A pair of pliers. The small triangle that is formed at the tip of the torch when you add oxygen is called. Adjust acetylene to form feather shaped flame. Continue to add oxygen until neutral flame is established.
If there is too much acetylene, flame breaks away from the tip. Slowly add oxygen—flame will sharpen and elongate. How to properly light, adjust and shut down an oxy – acetylene torch Harris Products Group.
Lighting, adjusting and shutting down an oxygen- acetylene torch is easy – especially when following the proper procedures.
By creating a safe work environment and carefully monitoring the pressure of the oxygen and acetylene, you can use an oxy-acetylene torch for any number of projects! It uses extreme heat to function, and setting it up properly is one of the most. Re: testing oxy acetylene regulators. Gauges are easily replacable.
When you replace the gauge, teflon the threads. Also if the gauge stem is bent, make sure the threads are okay and that nothing else is damaged! At the torch en check valves are all you need.
Tests showed that an oxy -gasoline torch can cut steel plate up to 0. Turning counterclockwise reduces or stops the gas flow.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.