Wednesday, September 2, 2015

Sprinkler fire fighting system

Tons Of Accessories Available Too. The Right Hose For Your Building. To Pound Extinguishers. Usually from 7bar to 10bar.


A fire sprinkler system is an active fire protection metho consisting of a water supply system , providing adequate pressure and flowrate to a water distribution piping system , onto which fire sprinklers are connected. Although historically only used in factories and large commercial buildings, systems for homes and small buildings are now available at a cost-effective price.

Fire sprinkler systems are extensively used worldwide, with over million sprinkler heads fitted each year. This type of system requires two triggers to start water flow. It helps greatly that the pre-action fire sprinkler can be set to prevent water from spouting in case of a false alarm or a mechanical failure. Many type of fire fighting systems base on occupancy and application,in our fire fighting design course deal with almost common system ( water system ). In the event of a fire , only those sprinklers in the immediate vicinity of the fire are activated.


The sprinkler incorporates a glass tube containing a special fluid and a small amount of air. If the temperature increases, the fluid expands in the glass tube. The pressure continues to build until the air in.

Fire fighting pipe is a type of normal carbon steel pipe used to convey fire suppression agent such as water or gas. But light-wall pipes have a galvanized exterior of a silvery appearance. Installation of red steel pipe is limited to wet pipe sprinkler systems only. Let science extinguish this myth.


The company undertakes the design, supply, installation and maintenance of all types of fire protection systems. It has been developed for more than two centuries and been improved over the years. In the worldwide, the buildings now over of fires are protected by the fire fighting sprinkler system alone. Each one from the above three category take you from began to next level of system acknowledgment. A tree system is 'end feed', that is water is only fed from one direction as opposed to a grid or loop system when water may arrive at the sprinkler head from more than one direction.


Below is a diagram of the three sprinklers and three pipes which we will calculate. A sprinkler will usually be activated very quickly in a fire - possibly before the fire station has been informed of the fire - and therefore is very effective at putting out a fire in the early stages, before it grows into a large fire. Sprinkler Fire Fighting System.


For this reason, a sprinkler system is considered very good at putting out fires before they spread and become unmanageable. The difference, however, is that water is held from piping by an electrically operated valve, known as a pre-action valve. Designed for maximum home fire protection Professional installation of the Platypus bushfire sprinkler system ensures maximum home fire protection.


In elevator shafts where sprinklers may freeze, the sprinkler line to the shaft shall have a normally closed solenoid valve controlled by the fire panel so that no water may enter the sprinkler system in the elevator shaft until the elevator shunt trip has been activated. Thanks for Contacting Us.

The provided system is manufactured using quality assured basic material and modern techniques by our deft professionals in line with the set industry norms.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Popular Posts