The working principle of the external gear pump is illustrated in Figure 1. A drive gear (that is driven by a motor) rotates an idler gear in the opposite direction. The rate of flow of a gear pump is the quantity of fluid actually delivered per unit of time, including both the liquid and any dissolved or entrained gases, at stated operating conditions. In the absence of any vapor entering or forming within the pump , rate of flow is equal to the volume displaced per unit of time, less slip.
Cast-iron gear pumps and motors D Series pumps and motors are of cast-iron construction.
Pumps and motors feature a pressure-balanced design for high volumetric and mechanical efficiencies. Sauer-Danfoss offers gear pumps and motors throughout a wide range of displacements. An exclusive Micropump product featuring a patented technology. Modified pump chamber compared to the conventional gear pump technique This type of pump-head design has a seal plate mounted with a deliberate play in the suction part of the pump chamber (hence the expression Suction Shoe). For All Units To determine direction of shaft rotation, view the unit with the shaft pointing toward you, and the idler (driven) gear beneath the shaft.
With clockwise rotation, flow will be left to right. The pump inlet port will be on the left, outlet on the right. Gear pump is among the important pumps , which are used on board ship.
They are basically having gears , and these gears are responsible for the providing pressure energy to the fluid flowing through it. They mainly find their application in the lubrication oil transfer and hence are fitted with the main engine lubrication system. So, let’s study about this pump in little more details.
A gear pump uses the meshing of gears to pump fluid by displacement. They are one of the most common types of pumps for hydraulic fluid power applications. Gear pumps are also widely used in chemical installations to pump high viscosity fluids. Need Hydraulic Pump s for Home or Pro Use?
INLET 1REMARK: The size in ( ) is for special order, see page 1for the size of A, B and C port size. The pump which you are now using is of the external gear type. External gear pumps are a popular pumping principle and are often used as lubrication pumps in machine tools, in fluid power transfer units, and as oil pumps in engines. External gear pumps can come in single or double (two sets of gears) pump configurations with spur (shown), helical, and herringbone gears.
Our gears are produced to precise tolerances with a true involute profile along the tooth thus maximising volumetric efficiency. To produce a flow within a gear pump , fluid is carried by the CVs from the intake side of the pump to the discharge side of the pump through the transi-tion zone. As the gears rotate, these CVs increase their pressure to when reach the high-pressure cham-ber.
Measure width of body or gears if unable to read computer stock number. CONTROL NUMBER (MAY INCLUDE DESCRIPTIVE NO.) BODY WIDTH: MEASURE THIS AND REFER TO CHART DIRECTION OF ROTATION = DUAL P = PUMP M = MOTOR DATE CODE NO. YEAR TESTERS CODE FIRST DIGITS OF DISPLACEMENT.
One shaft is driven by a motor or some other means. The fluid is carried around the outside of the gears to the outlet side of the pump. The volume is constant given each cycle of operation. These types of pumps have gears in it which have the ability to provide pressure energy to the fluid in the pumps.
In simple words, we can say that the gear pumps transfer the fluids from one part to another using gear mechanism. The gear pump is one of the most important pumps. Get the Hydraulic Pump s You Need.
Shop Online Now at Northern Tool!
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.