Overhead crane pdf

The ABUS travelling crane range includes four series designed for different appli-cations and operating conditions: single girder, double girder, under-slung and single girder wall travel-ling cranes. PARTS OF AN OVERHEAD CRANE Cranes lift and lower loads with a hoist that is attached to a trolley. The trolley moves back and forth along a bridge.

The bridge moves along a runway. Some cranes – such as a jib crane – don’t have a bridge but still have a hoist attached to a trolley and can move a load in a horizontal direction.

They are also characterized by their outstanding crane geometry, ensuring extremely favorable travel characteristics and therefore minimizing wear. Review the Crane Safety Program on an annual basis and revise it as necessary. Provide the technical assistance regarding the regulatory requirements of cranes , chains, slings, and hoists. Provide or arrange training for the safe operation of overhead cranes , and the inspection procedure for chains, slings and hoists. ABUS cranes make light work of lifting.

It is a position of responsibility that the operator shall be qualified to hold. Crane : A top running overhead or gantry crane. Designated: A person selected or assigned by the employer or the employer’s representative as being qualified to perform specific duties.

Topics include safe operating procedures, pre-operating inspection, proper rigging and lifting, moving and placing a load safely. An overhead crane usually consists of three separate motions: 1. A variation on these types of overhead crane are Gantry Cranes. These cranes are essentially the same as the regular overhead cranes , however, the bridge girder(s) are connected to “legs” on either side of the span. Minimum crane clearances must include inches overhead and inches laterally. Outdoor cranes must be equipped with a visib le or audible wind velocity detector.

Items stored in the cab must be secured at all times. All these devices should be 1 sensitive and functional. Partnering with an overhead crane manufacturer is a big decision and one that should not be taken lightly. The design, manufacturing, and installation of an overhead crane system is an enormous investment, but a necessary one if you want to improve your company’s efficiency and workflows. This type of crane hoist is used to move a load horizontally.

Rated Load (Capacity): The maximum load designated by the manufacturer for which a crane or individual hoist is designed and built. Department of Labor (OSHA). CMAA member companies are concerne conscientious manufacturers who meet regularly to review and revise standards for the mechanical, structural and electrical design of overhead cranes.

CMAA members also formulate guidelines for the proper use, operation and maintenance of those cranes. This manual may be used as a tool in the overall training and authorization of a prospective overhead crane operator.

Employers and employees need to be aware that all cranes are different and may have specific operating, safety, inspection and maintenance requirements. The Crane , Hoist and Monorail Alliance OVERHEAD CRANE SAFETY TIPS CARD Operating the Crane and Moving the Load Fatalities or serious injuries can occur if overhead cranes are not inspected and properly used. Fatalities may occur when workers are struck by a loa or pinched between the load and another object. A solid investment in handling efficiency and performance with its exceptional load capacity and minimum deadweight.

Be sure to check out this overhead crane ! Overhead and Gantry Cranes. EKWK Wall-Mounted Travelling Cranes Up to 6. Our Demag overhead crane is the best for adjacent workplaces.